Setting n1mm & SmartSDR to play wav files

 ·         To use on the fly voice recording and playback:

·         Check “PTT via Radio Command SSB Mode” in the radio COM port configuration window.

·         Check “Internal Radio Codec” in the Playback tab of Logger+ Audio Setup.

Just in case if needed:  ZZDX0;  = DAX OFF       ZZDX1; = DAX ON     

Here are some screenshots:

80m net – my signal at m0mcx

 

New diploma to collection

 

Another one to my collection ;)

Run fldigi waterfall only on startup (MAC OS)

 If you wanna run the only waterfall when starting fldigi on mac os you can use the simple command: /Applications/AFU/fldigi.app/Contents/MacOS/fldigi –wfall-only

Large hamradio map for printing

 If you looking to print a large ham radio map here is one to download. https://www.dropbox.com/s/95rvabt5p1flu7k/1544562698858_hammap.pdf?dl=0

LRotor for RumlogNG

 If you looking to print a large ham radio map here is one to download.  A copy of the rotor control app from NF4L/Mike (SK). This can be used together with rumlogng. Click the link below.

https://www.dropbox.com/s/jegvfkux4gz4ao4/LRotor-1.zip?dl=0

Good quality QSL cards shiped worldwide!

 For more info click on the image below!

CAT comand for ic-7300 to play recoded messages

You can use those CAT commands to play pre-recorded messages on the ic-7300. (the sample for mixw software) F1 CQ,{CAT1Hex FE FE 94 E0 28 00 01 FD} F2 CQ x2,{CAT1Hex FE FE 94 E0 28 00 02 FD} For mixw software would be the following T1 – Just change the last 01 or 02 nr to the desired message.

6m RSGB UKAC MARCH

6m ukac 09.02.2017

Some QSO's last night

New addition to my collection :) YOTA

Building nanoKeyer...

After some research found nice little thing called nanoKeyer...

This is arduino based winkeyer. Parts received and enclose...Fun begins :) 

All info can be found here: https://nanokeyer.wordpress.com/

My son involved as well :)

MixW and Flex-3000 CW&Digi modes all setup in pictures

Finally managed to get working CW and digi modes in MixW and Powersdr with my flex-3000.